UG api assemble 装配的写法 实例

xcb

一个装配的实际例子，有一定的参考价值。  原帖地址：http://www.ugufun.com/?p=74

8 o) O/ e( U7 t0 H

#include <stdio.h>
$ e4 b8 U- X0 _5 I) v#include <uf.h>
- u( O, I: o# a( B: e6 V+ E#include <string.h>
#include <stdlib.h>
3 `3 U, ]: C8 e, U5 ]#include <uf_defs.h>
#include <uf_exit.h>
4 i$ W/ Q. y  l; _8 Q#include <uf_ui.h>
" k: I# V3 J# t+ H' {7 y. b# D#include <uf_styler.h>
#include <uf_mb.h>
#include <uf_part.h>
! l! [" Z7 t! a9 X) P0 |  S#include <uf_assem.h>
#include "assemble.h"
, m- {, ]# N( \4 \8 a#include <uf_obj.h>
#include <uf_modl.h>

/* The following definition defines the number of callback entries */
/* in the callback structure: */
# h" h# l  d9 d; O/* UF_STYLER_callback_info_t CHANGE_cbs */
#define CHANGE_CB_COUNT ( 4 + 1 ) /* Add 1 for the terminator */

/*--------------------------------------------------------------------------
4 _$ Z' F' N0 `+ c4 Z2 l! `The following structure defines the callback entries used by the
! I4 e+ E$ f  qstyler file. This structure MUST be passed into the user function,
UF_STYLER_create_dialog along with CHANGE_CB_COUNT.
--------------------------------------------------------------------------*/
static UF_STYLER_callback_info_t CHANGE_cbs[CHANGE_CB_COUNT] =
{

{CHANGE_ACTION_0 , UF_STYLER_ACTIVATE_CB , 0, CHANGE_action_0_act_cb},
{CHANGE_ACTION_1 , UF_STYLER_ACTIVATE_CB , 0, CHANGE_action_1_act_cb},
0 K9 k/ i% G. T. o' |2 C" K{CHANGE_ACTION_2 , UF_STYLER_ACTIVATE_CB , 0, CHANGE_action_2_act_cb},
2 N# T0 V  s* b7 i{CHANGE_ACTION_3 , UF_STYLER_ACTIVATE_CB , 0, CHANGE_action_3_act_cb},
{UF_STYLER_NULL_OBJECT, UF_STYLER_NO_CB, 0, 0 }
};

: a: `# o7 K- Y1 Z3 ustatic UF_MB_styler_actions_t actions[] = {
9 F1 g  q; d9 [4 n{ "11.dlg", NULL, CHANGE_cbs, UF_MB_STYLER_IS_NOT_TOP },
{ NULL, NULL, NULL, 0 } /* This is a NULL terminated list */
};
//#ifdef MENUBAR_COMMENTED_OUT
extern void ufsta (char *param, int *retcode, int rlen)
. t  Z! A+ r4 M( f+ S4 V# f* F{
int error_code;

if ( (UF_initialize()) != 0)
7 U% }3 d) Q+ Z1 z& oreturn;

if ( (error_code = UF_MB_add_styler_actions ( actions ) ) != 0 )
2 a( V$ j" a% q: e7 ^3 w. _{
char fail_message[133];

UF_get_fail_message(error_code, fail_message);
$ P) ~* n2 v( a1 V9 |printf ( "%s\n", fail_message );
}

UF_terminate();
6 }2 p/ e6 P. C7 |3 Dreturn;
+ v0 d/ e  q, W}
  d. q4 v  e$ M' s( A$ t//#endif /*MENUBAR_COMMENTED_OUT*/

6 s% t6 c0 Y* o/ U: D$ t5 S9 x) Q#ifdef DISPLAY_FROM_CALLBACK
% I/ S! j6 {) [# l$ Zextern int <enter the name of your function> ( int *response )
. ^( w/ N; @- d" E( a{
0 c$ B& z. x1 p; ], Q- U& Bint error_code = 0;

if ( ( error_code = UF_initialize() ) != 0 )
return (0) ;

if ( ( error_code = UF_STYLER_create_dialog ( "assemble.dlg",
3 }! ~1 R+ Q5 ?8 L, \% v" HCHANGE_cbs, /* Callbacks from dialog */
- u) ?2 m: z' K8 b, DCHANGE_CB_COUNT, /* number of callbacks*/
4 w) |  T3 p4 q0 {NULL, /* This is your client data */
! M4 ?" y/ g: _3 \! v8 U+ gresponse ) ) != 0 )
{
char fail_message[133];

/* Get the user function fail message based on the fail code.*/
' T* @: R. u$ K3 H( j. H( eUF_get_fail_message(error_code, fail_message);
! `, F3 ?2 Z2 JUF_UI_set_status (fail_message);
printf ( "%s\n", fail_message );
}
UF_terminate();
9 {' x) _% H, m. ^+ d7 mreturn (error_code);
% f9 Z$ J% I& `8 T( ^}
#endif /* DISPLAY_FROM_CALLBACK */

#ifdef DISPLAY_FROM_USER_EXIT
1 s; q( _& i8 {2 Y8 eextern void <enter a valid user exit here> (char *param, int *retcode, int rlen)
& O/ _# i5 i0 E, v, h{
, p' z9 |" U% q* s- f8 U( e$ h! y: G6 W' xint response = 0;
$ e% T- y, y! }$ u9 zint error_code = 0;

if ( ( UF_initialize() ) != 0 )
return;

if ( ( error_code = UF_STYLER_create_dialog ( "assemble.dlg",
% y0 K4 K1 c5 y# s. V# c& R8 Y; |CHANGE_cbs, /* Callbacks from dialog */
( h2 r" g' m4 q  j* B$ D9 tCHANGE_CB_COUNT, /* number of callbacks*/
NULL, /* This is your client data */
&response ) ) != 0 )
{
6 g$ O7 f5 z# ichar fail_message[133];

/* Get the user function fail message based on the fail code.*/
UF_get_fail_message(error_code, fail_message);
; V8 N2 C  t( T% ^4 v" hUF_UI_set_status (fail_message);
3 h1 a% r) B9 Uprintf ( "%s\n", fail_message );
}
8 F& C' F; C8 [7 z! O; Z- Z" qUF_terminate();
2 E! X  M( F/ S$ Z1 u" Nreturn;
}

-------------------------------------------------------------------------*/

extern int ufusr_ask_unload (void)
1 `. W- |: S, t2 `2 w( C1 O{
1 C( e+ S0 y0 M/* unload immediately after application exits*/
; ?- j; G' H2 \8 z$ }  f7 l# ~return ( UF_UNLOAD_IMMEDIATELY );

/*via the unload selection dialog... */
/*return ( UF_UNLOAD_SEL_DIALOG ); */
/*when ug terminates... */
/*return ( UF_UNLOAD_UG_TERMINATE ); */
}

' d( V! V2 I+ i7 F6 ~) Y' V

/*--------------------------------------------------------------------------
You have the option of coding the cleanup routine to perform any housekeeping
chores that may need to be performed. If you code the cleanup routine, it is
3 T+ r% X- o) H) o3 |$ oautomatically called by Unigraphics.
! l* w( M9 V) I1 Q--------------------------------------------------------------------------*/
extern void ufusr_cleanup (void)
2 X. [: w1 [4 }+ V) }{
return;
}
#endif /* DISPLAY_FROM_USER_EXIT */

int CHANGE_constructor ( int dialog_id,
, {: T; e) x$ Xvoid * client_data,
UF_STYLER_item_value_type_p_t callback_data)
{
/* Make sure User Function is available. */
if ( UF_initialize() != 0)
  w% B& N8 R+ v) F( ]return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */

UF_terminate ();

/* Callback acknowledged, do not terminate dialog */
return (UF_UI_CB_CONTINUE_DIALOG);
/* A return value of UF_UI_CB_EXIT_DIALOG will not be accepted */
; y0 `' A9 N' I4 ?( v/ R9 a3 \' b/* for this callback type. You must continue dialog construction.*/

}

int CHANGE_destructor ( int dialog_id,
void * client_data,
5 ~+ i% M; P! Y! r# O! vUF_STYLER_item_value_type_p_t callback_data)
{
& a$ x9 H& ?  H" ?& i4 {1 e/* Make sure User Function is available. */
if ( UF_initialize() != 0)
( F$ j' E8 ^# ?return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */

UF_terminate ();

/* Callback acknowledged, do not terminate dialog. */
/* A return value of UF_UI_CB_EXIT_DIALOG will not be accepted */
/* for this callback type. You must continue dialog destruction*/
return (UF_UI_CB_CONTINUE_DIALOG);

}

: i  I; G: x3 j

int CHANGE_ok ( int dialog_id,
void * client_data,
  v6 N9 x- w7 U3 M& P- O/ m' OUF_STYLER_item_value_type_p_t callback_data)
/ f' q6 @6 _0 r) C5 S{
+ ]( o0 T/ i" o+ ]& Z3 O  n/* Make sure User Function is available. */
if ( UF_initialize() != 0)
& f8 x/ Q( a5 `' _: {. Lreturn ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */

UF_terminate ();

/* Callback acknowledged, terminate dialog */
/* It is STRONGLY recommended that you exit your */
: N6 i" s) H: R& r/* callback with UF_UI_CB_EXIT_DIALOG in a ok callback.*/
/* return ( UF_UI_CB_EXIT_DIALOG ); */
return (UF_UI_CB_EXIT_DIALOG);

}

4 N* W/ d! `# G( E, I

int CHANGE_apply_cb ( int dialog_id,
. W5 r) @* O2 Q6 Gvoid * client_data,
) Y  {2 p8 c6 q# _  k4 I  AUF_STYLER_item_value_type_p_t callback_data)
{
+ W2 d# [. ?( y: M: m% T2 g1 T/ v/* Make sure User Function is available. */
if ( UF_initialize() != 0)
return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */

UF_terminate ();

/* Callback acknowledged, do not terminate dialog */
* N3 C0 J0 g3 k: d$ i$ E2 }/* A return value of UF_UI_CB_EXIT_DIALOG will not be accepted */
0 m$ j5 }+ e9 I1 ^1 }/* for this callback type. You must respond to your apply button.*/
return (UF_UI_CB_CONTINUE_DIALOG);

}

4 L% e+ j$ X2 P: f, z" A6 I4 B

int CHANGE_cancel ( int dialog_id,
8 i) `& ]0 O. m1 D" Lvoid * client_data,
; t2 ^# r( J9 j2 tUF_STYLER_item_value_type_p_t callback_data)
{
. J# ^. A5 w" k/ X1 ?9 E2 T" W/* Make sure User Function is available. */
if ( UF_initialize() != 0)
. S$ r% z4 V1 }return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */

UF_terminate ();

/* Callback acknowledged, terminate dialog */
/* It is STRONGLY recommended that you exit your */
/* callback with UF_UI_CB_EXIT_DIALOG in a cancel call */
/* back rather than UF_UI_CB_CONTINUE_DIALOG. */
return ( UF_UI_CB_EXIT_DIALOG );

}

int CHANGE_action_0_act_cb ( int dialog_id,
void * client_data,
) h  ]+ [' V2 O! h. iUF_STYLER_item_value_type_p_t callback_data)
* [) ]9 B* H- [7 w* ]{
/* Make sure User Function is available. */
char dir1[100];
const char env[255]="UGII_USER_DIR";
char *basedir=NULL;

char *part="E:\\assemble.prt"; //创建新的文件名称、路径
char * refset_name1=NULL; //Name of reference set to use from component parts.
double origin1[ 3 ]={0.0,0.0,0.0}; //Position in <parent_part> where the instance is to be created
* _1 t9 |! e; o% Wchar * instance_name1="fuban"; //Name of new instance
5 b( [: h2 H1 S2 k0 ~! |7 o- F) Mdouble csys_matrix1[ 6 ]={1.0,0.0,0.0,0.0,1.0,0.0};//Orientation of the instance

int layer1=0; //0 Means use the work layer
tag_t instance,instance1; //Tag of the new instance in the work part
5 ?7 {+ z. `" g. C" h! G) \" Mint ret;
! S6 X7 W& v/ A8 K( A% }6 pchar message[133];
UF_PART_load_status_t error_status1; //User allocted structure consisting of names and associated error codes.

if ( UF_initialize() != 0)
# [0 o6 C3 f5 L$ u& j+ M% Creturn ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */
# s* ]; V, K: F3 t& G( N) ^basedir=getenv(env);
strcpy(dir1,basedir);
strcat(dir1,"\\part\\fuban.prt");
UF_PART_new(part, UF_PART_METRIC, &instance); //创建一个新的文件

ret = UF_ASSEM_add_part_to_assembly (instance, dir1, refset_name1, instance_name1, origin1,
csys_matrix1, layer1, &instance1, &error_status1 );// 增加名为a.prt的零件
) u$ h, h; P" }# Vif(ret != 0)
{
UF_get_fail_message(ret,message);
2 Y* z+ ^& p0 r9 g* D2 [}

UF_terminate ();
: M) d! _. {0 k/* Callback acknowledged, do not terminate dialog */
# C; c. _6 I& r$ Ureturn (UF_UI_CB_CONTINUE_DIALOG);

/* or Callback acknowledged, terminate dialog. */
1 B- s0 U5 C; R) O' E/* return ( UF_UI_CB_EXIT_DIALOG ); */

}

, {8 a& J0 O% K# F. i

int CHANGE_action_1_act_cb ( int dialog_id,
void * client_data,
UF_STYLER_item_value_type_p_t callback_data)
{ char dir2[100];
const char env[255]="UGII_USER_DIR";
char *basedir=NULL;

char * refset_name2=NULL;
) i8 i4 f( C* c9 Mdouble origin2[ 3 ]={0.0,0.0,100.0};
0 D6 J6 {( V2 J0 S& Uchar * instance_name2="shangyiban";
double csys_matrix2[ 6 ]={1.0,0.0,0.0,0.0,1.0,0.0};

int layer2=0;
tag_t work_part,instance2;
UF_PART_load_status_t error_status2;

/* Make sure User Function is available. */

if ( UF_initialize() != 0)
return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */
, V, X1 e' s2 `2 e  I+ Ybasedir=getenv(env);
strcpy(dir2,basedir);
% m2 U1 E. e. X  j' Z/ i! |strcat(dir2,"\\part\\shangyiban.prt");
work_part=UF_ASSEM_ask_work_part();//Returns the part tag of the current work part.

UF_ASSEM_add_part_to_assembly (UF_PART_ask_display_part(), dir2, refset_name2, instance_name2, origin2,
csys_matrix2, layer2, &instance2, &error_status2 );// 增加名为b.prt的零件

UF_terminate ();

/* Callback acknowledged, do not terminate dialog */
4 j, `3 ]% B: x" }0 P: F* ]return (UF_UI_CB_CONTINUE_DIALOG);

/* or Callback acknowledged, terminate dialog. */
, A3 T* s4 ?3 {3 g/* return ( UF_UI_CB_EXIT_DIALOG ); */

}
% v: V) f9 f9 x- Y: b6 k) I/ zint CHANGE_action_3_act_cb ( int dialog_id,
$ I  p0 ]3 ]4 p" cvoid * client_data,
UF_STYLER_item_value_type_p_t callback_data)
{ char dir3[100];
+ I8 M! I$ Z$ @( x* N2 dconst char env[255]="UGII_USER_DIR";
char *basedir=NULL;

char * refset_name3=NULL;
* Z2 w. _2 A6 n* N0 d  v, R- jdouble origin3[ 3 ]={0.0,10.0,0.0};
char * instance_name3="xiayiban";
double csys_matrix3[ 6 ]={1.0,0.0,0.0,0.0,1.0,0.0};

int layer3=0;
tag_t work_part,instance3;
UF_PART_load_status_t error_status3;

/* Make sure User Function is available. */

if ( UF_initialize() != 0)
9 w1 b) v/ J. S* O0 }. Sreturn ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */
basedir=getenv(env);
4 B& b1 C0 H; Kstrcpy(dir3,basedir);
, Y2 z8 T( s( m8 K/ s' M7 astrcat(dir3,"\\part\\xiayiban.prt");
* v3 |, q. T1 Uwork_part=UF_ASSEM_ask_work_part();//Returns the part tag of the current work part.

UF_ASSEM_add_part_to_assembly (UF_PART_ask_display_part(), dir3, refset_name3, instance_name3, origin3,
csys_matrix3, layer3, &instance3, &error_status3);// 增加名为b.prt的零件

UF_terminate ();

/* Callback acknowledged, do not terminate dialog */
return (UF_UI_CB_CONTINUE_DIALOG);

/* or Callback acknowledged, terminate dialog. */
7 |* P  o3 n. k& S/* return ( UF_UI_CB_EXIT_DIALOG ); */

}
2 z) ]6 g; x7 F& X4 z# j5 U///////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////
6 ?" {4 l/ W* p  h8 z. Q: D//////////////////////////////////////////////////////////////

int CHANGE_action_2_act_cb ( int dialog_id,
void * client_data,
UF_STYLER_item_value_type_p_t callback_data)
{
int ret;
& h  v3 @. K/ Y7 u+ kchar * name1="ENDFACE1";
( k% F1 G& [+ R% v' K5 ychar * name2="ENDFACE2";
% C; ?* {+ M) Echar * name3="CYCLE1";
char * name4="CYCLE2";
char * name5="CYCLE3";
/ o% D2 P8 y7 h) Fchar * name6="ENDFACE3";
char * name7="ENDFACE4";

//char * name[4]={"Datum1","Datum2","Datum3","Datum4"};
$ J& h8 E5 j7 C& G7 [+ \/*char * name1="Datum1";
char * name2="Datum2";
/ v7 B1 ?' W) T# achar * name3="Datum3";
) ~) g: K5 A" B' g& |6 xchar * name4="Datum4";
0 S9 {" ]. o) o- _: Qchar * name5="Datum5";
( ^/ A2 B& b. V: x; u( O: kchar * name6="Datum6";*/
//char * name[4]={"Datum1","Datum5","Datum2","Datum6"};
6 _0 \% ^# N3 B; ^tag_t first_plan,second_plan,third_plan,forth_plan,cylinder_face1,cylinder_face2,cylinder_face3,Datum3,Datum4;
. [* q6 S  M* T" g, m) D1 l// tag_t Datum1,Datum2,Datum3,Datum4,Datum5,Datum6;

tag_t Datum[3];
9 T1 J, V: l+ _& t) I* o$ ytag_t atum[3];
: b4 `' K3 _" R% k4 o) s& q5 ?, Utag_t from_part_occ;
tag_t to_part_occ;
tag_t from_part_ins;
8 D0 R8 A$ }! N  ^( r! ]tag_t to_part_ins;
logical is_occ;

& [" {  k' ~3 j$ q! @- d

tag_t cylinder_from_part_occ;
tag_t cylinder_to_part_occ;
tag_t cylinder_from_part_ins;
tag_t cylinder_to_part_ins;
// logical is_occ;

//提示所显示的实例的名称
1 G7 s9 h; L. [6 r: E, q( kchar part_name[ 256 + 1 ];
1 z6 h; V6 u8 @6 z$ ]  Rchar refset_name[ 30 + 1 ];
4 x" r* X7 E: r! C9 `7 Jchar instance_name[ 30 + 1 ];
double origin[ 3 ];
5 p4 d. ?4 V, s2 t: Gdouble csys_matrix[ 9 ];
& t8 Z+ V) i5 y9 y' e" L5 P4 A" xdouble transform[ 4 ][ 4 ] ;
char message[133];
int kk,tt,zz;
& L* ]  A! `9 Z) e9 o5 N//======
8 T2 N* ?$ J) g/ {. p. i+ U//char tt[10];
+ K9 c0 Z7 C" _: S, d0 z. H//======
UF_ASSEM_mc_status_t status;
UF_ASSEM_mc_structure_state_t struct_status;
" O0 E/ P% C# D2 z3 [UF_ASSEM_dof_t dof;
- s4 a; c; X. |0 N/ g- JUF_ASSEM_mating_condition_t ftf;
//UF_ASSEM_mating_condition_p_t mc_data;

/* Make sure User Function is available. */
if ( UF_initialize() != 0)
return ( UF_UI_CB_CONTINUE_DIALOG );

/* ---- Enter your callback code here ----- */
first_plan=NULL_TAG;
second_plan=NULL_TAG;
third_plan=NULL_TAG;
& f3 `/ h6 t3 w* j- Uforth_plan=NULL_TAG;
- ?) i1 `; L6 N, Gcylinder_face1=NULL_TAG;
cylinder_face2=NULL_TAG;
3 c6 h1 L/ r4 c2 \3 qcylinder_face3=NULL_TAG;
1 T% ^# G- ?, H. Y0 gDatum4=NULL_TAG;
! b) I1 X% N  Y/ hDatum3=NULL_TAG;
* ~' p; v9 Y8 B5 g* n% A//for(int j=0;j<2;j++)
' ~! \1 \4 D! Z0 G//{

/* Datum1=NULL_TAG;
+ c1 E( K# I) I: f+ D% n( nDatum2=NULL_TAG;
Datum3=NULL_TAG;
: h. M, @  X8 CDatum4=NULL_TAG;
! M5 o% D9 N. f( O3 KDatum5=NULL_TAG;
Datum6=NULL_TAG;*/
  p+ U! c+ Z6 r//Datum[j+1]=NULL_TAG;
% U: M1 M, y( p1 c- @//UF_OBJ_cycle_by_name (name[j], &Datum[j+1]);

/*Datum1=NULL_AG;
Datum2=NULL_TAG;
9 I  L/ |( X5 \1 y+ j: a: lDatum3=NULL_TAG;
: V' B8 G) [8 Q& G4 }8 g& o5 ADatum4=NULL_TAG;
5 ~( H9 X  }" k9 Q- SDatum5=NULL_TAG;
% k4 Z4 n2 X5 P0 q4 X6 HDatum6=NULL_TAG;
//atum[j+1]=NULL_TAG;
//UF_OBJ_cycle_by_name (name[j+2], &atum[j+1]);}
/ Q: l8 [- H# z# A7 c/*UF_OBJ_cycle_by_name (name1, &Datum1);
UF_OBJ_cycle_by_name (name2, &Datum2);
UF_OBJ_cycle_by_name (name3, &Datum3);
UF_OBJ_cycle_by_name (name4, &Datum4);
$ G+ n5 i6 p0 T) |" {5 d9 E* TUF_OBJ_cycle_by_name (name5, &Datum5);
UF_OBJ_cycle_by_name (name6, &Datum6);*/
UF_OBJ_cycle_by_name (name1, &first_plan);
UF_OBJ_cycle_by_name (name2, &second_plan);
// UF_DISP_set_highlight(first_plan,1);
// UF_DISP_set_highlight(second_plan,1);

UF_OBJ_cycle_by_name (name3, &cylinder_face1);
UF_OBJ_cycle_by_name (name4, &Datum3);
3 A: J! j* d8 o+ a0 Z7 R0 iUF_OBJ_cycle_by_name (name5, &Datum4);

// UF_DISP_set_highlight(first_plan,1);
// UF_DISP_set_highlight(second_plan,1);
" I) K% j( h' h6 o$ NUF_OBJ_cycle_by_name (name6, &third_plan);
9 ?! X, p+ f$ M5 t$ f8 ]UF_OBJ_cycle_by_name (name7, &forth_plan);
  |8 _( @4 ]# `! K4 M, }//====================================================================
//第一种匹配条件：选取UF_ASSEM_v16_mate和UF_ASSEM_planar_face进行匹配
/ j( U6 k) G* W' J" O4 U//====================================================================

//========================================================================
//第二种匹配条件：选取UF_ASSEM_center和UF_ASSEM_cylindrical_face进行匹配
" ~6 `3 N8 H! Y6 G$ e/ e//========================================================================
( J% L( u) p" I. M0 i///////////////////////////第四个平面//////////////////////
) k8 I0 J# Q6 v2 x% s, }; @1 }9 g//UF_MODL_ask_face_data (first_plan,[$type,point,dir,box,&radius,&rad_data,&norm_dir)]

/*for( j=0;j<2;j++)
{
' a  t+ a" H; n* ~; ?- e///////////////////////////第四个平面//////////////////////
//UF_MODL_ask_face_data (first_plan,[$type,point,dir,box,&radius,&rad_data,&norm_dir)]
$ h; E1 E& e; `' M* ~* v/ Oret=UF_ASSEM_ask_parent_component (Datum[j+1], &from_part_occ);//获取父标志
) Y4 j4 L8 r9 f# f6 F' \//is_occ=UF_ASSEM_is_occurrence(from_part_occ);//确定父标志类型
//TRUE = if object occurrence or a part occurrence.
//FALSE = if object is a prototype object
from_part_ins=UF_ASSEM_ask_inst_of_part_occ (from_part_occ);//获取part occurrence中instance的tag
//ret=UF_ASSEM_ask_component_data (from_part_occ,part_name,refset_name,instance_name,
1 }/ m- \7 E) z//origin, csys_matrix, transform);

///////////////////////////第三个平面//////////////////////
ret=UF_ASSEM_ask_parent_component (atum[j+1], &to_part_occ);
//to_part_ins=UF_ASSEM_ask_inst_of_part_occ (to_part_occ);
& h8 r9 T; X, o//ret=UF_ASSEM_ask_component_data (to_part_occ,part_name,refset_name,instance_name,
// origin, csys_matrix, transform);
4 b4 h' q) b9 R) p. p}
///////////////////////////第四个平面//////////////////////
//UF_MODL_ask_face_data (first_plan,[$type,point,dir,box,&radius,&rad_data,&norm_dir)]
// ret=UF_ASSEM_ask_parent_component (Datum[j+1], &from_part_occ);//获取父标志
//is_occ=UF_ASSEM_is_occurrence(from_part_occ);//确定父标志类型
; K5 M7 X, X; i) X4 a//TRUE = if object occurrence or a part occurrence.
//FALSE = if object is a prototype object
5 I/ i% U2 D3 g& M//from_part_ins=UF_ASSEM_ask_inst_of_part_occ (from_part_occ);//获取part occurrence中instance的tag
* d( L5 E! {& s# K4 M//ret=UF_ASSEM_ask_component_data (from_part_occ,part_name,refset_name,instance_name,
//origin, csys_matrix, transform);

///////////////////////////第三个平面//////////////////////
//ret=UF_ASSEM_ask_parent_component (atum[j+1], &to_part_occ);
0 K7 S2 i- X# ?& k$ z, R3 Z// to_part_ins=UF_ASSEM_ask_inst_of_part_occ (to_part_occ);
9 S& r4 g/ Z. h8 \// ret=UF_ASSEM_ask_component_data (to_part_occ,part_name,refset_name,instance_name,
8 k+ `2 ]5 i4 @1 i5 b// origin, csys_matrix, transform);

///////////////////////////第三个圆柱面//////////////////////
ret=UF_ASSEM_ask_parent_component (Datum[3], &cylinder_from_part_occ);
cylinder_to_part_ins=UF_ASSEM_ask_inst_of_part_occ (cylinder_from_part_occ);
ret=UF_ASSEM_ask_component_data (cylinder_to_part_occ,part_name,refset_name,instance_name,
# i0 v; I0 m! L1 worigin, csys_matrix, transform);

///////////////////////////第二个圆柱面//////////////////////
ret=UF_ASSEM_ask_parent_component (Datum[4], &cylinder_to_part_occ);
cylinder_to_part_ins=UF_ASSEM_ask_inst_of_part_occ (cylinder_to_part_occ);
ret=UF_ASSEM_ask_component_data (cylinder_to_part_occ,part_name,refset_name,instance_name,
/ x: l8 j+ w5 |: G% [, sorigin, csys_matrix, transform);

) t, {% q! {/ V0 k

//构造配合关系
. u$ a* {5 q' X: ^//=======================
UF_ASSEM_init_mc (&ftf); //初始化

ftf.mated_object=from_part_ins;
) A7 @( E( Y6 i) ~; u0 sftf.name=NULL;
ftf.user_name=FALSE;
9 @' P1 G4 k( e; b# ~2 G. J" u# K//char * mate_type[2]={UF_ASSEM_v16_mate,UF_ASSEM_v16_align};
for( j=0;j<2;j++)
: M' ]+ K$ n1 v. v9 t  l{
ftf.constraints[j].from_status = UF_ASSEM_ok;
, a* {  f9 m% ^; H) w2 Z( M1 nftf.constraints[j].to_status = UF_ASSEM_ok;
1 i( u7 k9 H% Z: b/*if(strcmp(strlwr(mate_type[j]),"m") == 0)
ftf.constraints[j].mate_type = UF_ASSEM_v16_mate;
else
ftf.constraints[j].mate_type = UF_ASSEM_v16_align;*/

/* ftf.constraints[j].mate_type = UF_ASSEM_v16_mate;
/ Y. ^, }8 q% d: Zftf.constraints[j].from_type = UF_ASSEM_datum_plane;
ftf.constraints[j].to_type = UF_ASSEM_datum_plane;
+ v+ H. g0 J$ X# _& C$ w* N8 [ftf.constraints[j].from = UF_ASSEM_ask_prototype_of_occ (Datum[j+1]);
' W6 P9 {: `9 b# Q! S% Tftf.constraints[j].from_part_occ = from_part_occ;
ftf.constraints[j].to = UF_ASSEM_ask_prototype_of_occ (atum[j+1]);
" O4 h0 J5 T# ]9 C3 oftf.constraints[j].to_part_occ = to_part_occ;
ftf.constraints[j].offset = NULL_TAG;
" k" H8 ^% J9 J# [ftf.constraints[j].name = "face to face";
ftf.constraints[j].user_name = TRUE;
/ n# t8 R4 x7 l* I6 k9 w}
4 x7 E: l& I3 d! S6 d/* ftf.constraints[1].from_status = UF_ASSEM_ok;
0 h4 t$ h: m& v6 m! Lftf.constraints[1].to_status = UF_ASSEM_ok;
* Z+ T% p1 T0 p& y: ~& T& M7 Kftf.constraints[1].mate_type = UF_ASSEM_v16_mate;
ftf.constraints[1].from_type = UF_ASSEM_datum_plane;
( ]  K' x  j7 I: a. J. l2 ]ftf.constraints[1].to_type = UF_ASSEM_datum_plane;
ftf.constraints[1].from = UF_ASSEM_ask_prototype_of_occ (Datum[5]);
; s# K( c5 P' |) ~2 |+ pftf.constraints[1].from_part_occ = from_part_occ;
ftf.constraints[1].to = UF_ASSEM_ask_prototype_of_occ (Datum[6]);
$ T( R% l7 ?& U. X9 gftf.constraints[1].to_part_occ = to_part_occ;
ftf.constraints[1].offset = NULL_TAG;
ftf.constraints[1].name = "face to face";
. R4 |2 p% m& s4 y7 hftf.constraints[1].user_name = TRUE; */

2 j' Q( @! V5 c

/*ftf.constraints[2].from_status = UF_ASSEM_ok;
ftf.constraints[2].to_status = UF_ASSEM_ok;
ftf.constraints[2].mate_type = UF_ASSEM_v16_mate; //选择同轴匹配类型
ftf.constraints[2].from_type = UF_ASSEM_datum_axis ;//定义为选取圆周面匹配
ftf.constraints[2].to_type = UF_ASSEM_datum_axis ;
6 o8 u5 o  E( f& Sftf.constraints[2].from = UF_ASSEM_ask_prototype_of_occ (Datum3);//获取选取对象原型的tag
: q; _8 {9 n5 z, z  n( yftf.constraints[2].from_part_occ = cylinder_from_part_occ; //匹配对象的part occurrence的tag
ftf.constraints[2].to = UF_ASSEM_ask_prototype_of_occ (Datum4);
5 r2 O$ W' i1 R6 N: B$ nftf.constraints[2].to_part_occ = cylinder_to_part_occ;
. p& W( D  q4 X$ E# a, Cftf.constraints[2].offset = NULL_TAG; //定义距离，可利用表达式控制
( z5 w5 m) q9 U1 C7 Qftf.constraints[2].name = "center to center";
ftf.constraints[2].user_name = TRUE;
2 W- `% x% S- R+ sftf.constraints[2].sub_type = UF_ASSEM_center_1_to_1;//选取角度和同轴对齐的适当子类型 */
/*ftf.num_constraints=2;
ftf.suppressed=FALSE;

ret=UF_ASSEM_solve_mc (&ftf, &status, &dof, transform);//条件计算
- R9 |3 g/ V6 |; Y  h9 W3 MUF_get_fail_message (ret,message);

if (ret==0||status==UF_ASSEM_mc_solved)
{
/ }. F. C! [2 t! i7 _ret=UF_ASSEM_apply_mc_data (&ftf, &struct_status, &status );//执行匹配
UF_DISP_refresh();
UF_MODL_update();
& s5 N( {3 d, y; @2 ]}

for(tt=1000;tt>0;tt--);
4 ^1 u% E) N: x5 S9 I& yfor(kk=1000;kk>0;kk--);
8 Z: B& G- L2 \* Qfor(zz=1000;zz>0;zz--);*/

///////////////////////////第四个平面//////////////////////
) V- B1 X3 }- g0 g//UF_MODL_ask_face_data (first_plan,[$type,point,dir,box,&radius,&rad_data,&norm_dir)]
ret=UF_ASSEM_ask_parent_component (third_plan, &from_part_occ);//获取父标志
is_occ=UF_ASSEM_is_occurrence(from_part_occ);//确定父标志类型
//TRUE = if object occurrence or a part occurrence.
# }9 z+ U% e& r) x//FALSE = if object is a prototype object
from_part_ins=UF_ASSEM_ask_inst_of_part_occ (from_part_occ);//获取part occurrence中instance的tag
ret=UF_ASSEM_ask_component_data (from_part_occ,part_name,refset_name,instance_name,
origin, csys_matrix, transform);

///////////////////////////第三个平面//////////////////////
+ G. D* K3 Z/ ]2 M8 y- o1 q; yret=UF_ASSEM_ask_parent_component (forth_plan, &to_part_occ);
- ^% h! X/ z9 q; `5 h0 x' s5 C( rto_part_ins=UF_ASSEM_ask_inst_of_part_occ (to_part_occ);
ret=UF_ASSEM_ask_component_data (to_part_occ,part_name,refset_name,instance_name,
origin, csys_matrix, transform);

///////////////////////////第三个圆柱面//////////////////////
ret=UF_ASSEM_ask_parent_component (Datum4, &cylinder_from_part_occ);
' a3 p8 i0 f0 X) F0 qcylinder_to_part_ins=UF_ASSEM_ask_inst_of_part_occ (cylinder_from_part_occ);
. K: I9 |& N. |9 W& m& [4 \ret=UF_ASSEM_ask_component_data (cylinder_to_part_occ,part_name,refset_name,instance_name,
" }! {6 L2 k! ^3 l7 B+ Sorigin, csys_matrix, transform);

///////////////////////////第二个圆柱面//////////////////////
7 k, J" D' }- _  x: kret=UF_ASSEM_ask_parent_component (Datum3, &cylinder_to_part_occ);
1 b9 }8 _# H# X( L7 ^% ecylinder_to_part_ins=UF_ASSEM_ask_inst_of_part_occ (cylinder_to_part_occ);
ret=UF_ASSEM_ask_component_data (cylinder_to_part_occ,part_name,refset_name,instance_name,
/ k8 [: {. |" A7 @5 S: b7 Uorigin, csys_matrix, transform);

//构造配合关系
//=======================
UF_ASSEM_init_mc (&ftf); //初始化

ftf.mated_object=from_part_ins;
ftf.name=NULL;
; x0 q  x' ^# c& b6 \ftf.user_name=FALSE;

//UF_MODL_ask_exp_tag_value(exp_tag, &value);
//sprintf(buf, "%f", value);
//uc1601(buf, 1);
double value;
! p4 R# |- S( @( O- \2 |6 j- Qchar exp_str[] ="distance=-60";
char buf[50];
tag_t exp_tag;

UF_MODL_create_exp_tag(exp_str, &exp_tag);
UF_MODL_ask_exp_tag_value(exp_tag, &value);
9 p% ]8 t) Q9 `5 Z- I- S; z//sprintf(buf, "%f", value);
//uc1601(buf, 1);
& A# N5 I- x. A: O% t. I//double l=value;
" B( X1 a" K+ e; gftf.constraints[0].from_status = UF_ASSEM_ok;
ftf.constraints[0].to_status = UF_ASSEM_ok;
9 p2 k1 `1 C" \  eftf.constraints[0].mate_type = UF_ASSEM_distance;
ftf.constraints[0].from_type = UF_ASSEM_planar_face;
ftf.constraints[0].to_type = UF_ASSEM_planar_face;
ftf.constraints[0].from = UF_ASSEM_ask_prototype_of_occ (third_plan);
* p' ~1 [4 q4 V. x! G5 u$ Yftf.constraints[0].from_part_occ = from_part_occ;
1 n& I8 g# A7 h! }ftf.constraints[0].to = UF_ASSEM_ask_prototype_of_occ (forth_plan);
1 p1 |' |/ f7 {1 e' d9 w* {ftf.constraints[0].to_part_occ = to_part_occ;

ftf.constraints[0].offset =exp_tag;

ftf.constraints[0].name = "face to face";
4 N3 s5 I: V, v' D3 S* Y$ m/ N9 N/ @ftf.constraints[0].user_name = TRUE;
- u/ P3 V+ K/ w& ~//ftf.constraints[0].sub_type = UF_ASSEM_3d_angle ;

ftf.constraints[1].from_status = UF_ASSEM_ok;
: g5 r" U6 X7 a; |& }9 h% nftf.constraints[1].to_status = UF_ASSEM_ok;
# P# A/ D6 r1 g  qftf.constraints[1].mate_type = UF_ASSEM_v16_mate; //选择同轴匹配类型
ftf.constraints[1].from_type = UF_ASSEM_datum_axis ;//定义为选取圆周面匹配
ftf.constraints[1].to_type = UF_ASSEM_datum_axis ;
8 o, x, J- y' z" F0 Zftf.constraints[1].from = UF_ASSEM_ask_prototype_of_occ (Datum4);//获取选取对象原型的tag
ftf.constraints[1].from_part_occ = cylinder_from_part_occ; //匹配对象的part occurrence的tag
ftf.constraints[1].to = UF_ASSEM_ask_prototype_of_occ (Datum3);
ftf.constraints[1].to_part_occ = cylinder_to_part_occ;
ftf.constraints[1].offset = NULL_TAG; //定义距离，可利用表达式控制
ftf.constraints[1].name = "center to center";
ftf.constraints[1].user_name = TRUE;
ftf.constraints[1].sub_type = UF_ASSEM_center_1_to_1;//选取角度和同轴对齐的适当子类型 */

ftf.constraints[2].from_status = UF_ASSEM_ok;
1 l4 v' ]  g; tftf.constraints[2].to_status = UF_ASSEM_ok;
+ C" n! T9 S4 U) b9 g6 b" cftf.constraints[2].mate_type = UF_ASSEM_parallel;
ftf.constraints[2].from_type = UF_ASSEM_planar_face;
) X7 l+ M& n+ M/ \, d& [ftf.constraints[2].to_type = UF_ASSEM_planar_face;
ftf.constraints[2].from = UF_ASSEM_ask_prototype_of_occ (first_plan);
: z5 B* \- u/ |0 k) }% oftf.constraints[2].from_part_occ = from_part_occ;
3 ~1 q8 L2 \9 E) j% s! Sftf.constraints[2].to = UF_ASSEM_ask_prototype_of_occ (second_plan);
ftf.constraints[2].to_part_occ = to_part_occ;

//ftf.constraints[0].offset =exp_tag;

ftf.constraints[2].name = "face to face";
ftf.constraints[2].user_name = TRUE;
/*ftf.constraints[1].from_status = UF_ASSEM_ok;
ftf.constraints[1].to_status = UF_ASSEM_ok;
ftf.constraints[1].mate_type = UF_ASSEM_center; //选择同轴匹配类型
ftf.constraints[1].from_type = UF_ASSEM_cylindrical_face;//定义为选取圆周面匹配
ftf.constraints[1].to_type = UF_ASSEM_cylindrical_face;
ftf.constraints[1].from = UF_ASSEM_ask_prototype_of_occ (cylinder_face3);//获取选取对象原型的tag
6 G; i! \" w3 ?1 R, h1 `- L9 eftf.constraints[1].from_part_occ = cylinder_from_part_occ; //匹配对象的part occurrence的tag
: P3 v7 ?" K" }! Cftf.constraints[1].to = UF_ASSEM_ask_prototype_of_occ (cylinder_face2);
ftf.constraints[1].to_part_occ = cylinder_to_part_occ;
ftf.constraints[1].offset =NULL_TAG ; //定义距离，可利用表达式控制
# ~. q# M! D. {! {% Y5 i+ T9 Sftf.constraints[1].name = "center to center";
7 _5 _9 @0 I6 V6 B3 ^# p! Jftf.constraints[1].user_name = TRUE;
ftf.constraints[1].sub_type = UF_ASSEM_center_1_to_1;//选取角度和同轴对齐的适当子类型 */
ftf.num_constraints=3;
ftf.suppressed=FALSE;

ret=UF_ASSEM_solve_mc (&ftf, &status, &dof, transform);//条件计算
UF_get_fail_message (ret,message);

if (ret==0||status==UF_ASSEM_mc_solved)
, S! F( g$ u% h$ X) @2 e* O{
ret=UF_ASSEM_apply_mc_data (&ftf, &struct_status, &status );//执行匹配
UF_DISP_refresh();
UF_MODL_update();
! h, U: J6 u  [$ D- n+ @}

UF_terminate ();

/* Callback acknowledged, do not terminate dialog */
return (UF_UI_CB_CONTINUE_DIALOG);

/* or Callback acknowledged, terminate dialog. */
/ N1 d  c: |8 L/* return ( UF_UI_CB_EXIT_DIALOG ); */

}

$ ?$ @/ {9 W; m* E  j: U